Original price was: $68.64.$45.95Current price is: $45.95.
In stock
These are a dish shaped flat steel pressure ring and there are normally only 1 or 2 in a bikes engine, you should never add MORE springs on a diaphragm spring set up. If you do wish to upgrade the clamp load and your bikes is fitted with a diaphragm spring clutch kit buy an EBC Brakes spring kit, all of which are built with 10-15% more clamp pressure than stock.
This can again reduce clutch slip and premature clutch wear.
| Weight | 0.80 lbs |
|---|---|
| Dimensions | 4.00 × 4.00 × 1.00 in |
| Make | Model | Engine | Year |
|---|---|---|---|
| KTM Motorcycle | 250 SX | 249 | 2013 - 2015 |
| KTM Motorcycle | 250 XC | 249 | 2013 - 2015 |
| KTM Motorcycle | 250 XC-W | 249 | 2013 - 2015 |
| KTM Motorcycle | 250 XCF-W | 249 | 2014 - 2015 |
| KTM Motorcycle | 300 XC | 293 | 2013 - 2015 |
| KTM Motorcycle | 300 XC-W | 293 | 2013 - 2015 |
| KTM Motorcycle | 350 EXC-F | 350 | 2012 - 2015 |
| KTM Motorcycle | 350 Freeride | 350 | 2012 |
| KTM Motorcycle | 350 XCF-W | 350 | 2012 - 2015 |
| KTM Motorcycle | 450 SX-F | 449 | 2012 - 2013 |
| KTM Motorcycle | 450 XC-F | 450 | 2013 |
| KTM Motorcycle | 450 XC-W | 449 | 2012 - 2013 |
| KTM Motorcycle | 500 EXC | 510 | 2012 - 2015 |
| KTM Motorcycle | 500 XC-W | 510 | 2012 - 2015 |
Use this to plug your speedometer drive gear when removing the cable for installation of an aftermarket speedometer or computer. Since the drive contains the spacer, you’ll need to keep the drive installed or use very expensive custom aftermarket spacers. These inexpensive plugs will let you seal the grease in and dirt/water out using the OEM retaining screw. Simply install the same as you woul…
Reviews
There are no reviews yet.